How to solve the problem in the use of color all resin carbon tape?

2026-10-25 12:33
680

When using colored all-resin carbon strips, a series of problems may be encountered, such as fading, unclear printing, wrinkling and so on. To solve these problems, here are some strategies:


1. Fading problem

The reason:

Quality issues: The manufacturer may have used low-quality or inferior raw materials, or the process is not rigorous.

Environmental and storage conditions: Too high or too low temperature and humidity environments can affect the quality of the carbon belt.

Printer Settings: Low print quality, high print speed, and overheating of the printer can all cause the carbon strip to fade.

Solution strategy:

Choose a good quality color all-resin carbon strip to ensure it comes from a reliable manufacturer.

Store the carbon strip under appropriate temperature and humidity conditions, the recommended relative humidity is 40%60%, and the temperature is 15°C30°C.

Adjust printer Settings, such as reducing print speed, improving print quality, and ensuring that the printer is operating within the appropriate temperature range.

2. The print is not clear

The reason:

The carbon strip coating is not uniform.

Print heads and rollers are dusty or grime.

Improper printer Settings, such as too low temperature or insufficient pressure.

Solution strategy:

Check that the coating of the carbon strip is uniform and replace it with a new one if necessary.

Clean print heads and rollers with industrial alcohol and cotton to remove dust and dirt.

Adjust your printer's temperature and pressure Settings for better print results.

3. Wrinkle problem

The reason:

Carbon strips are improperly disposed of during slitting or storage.

The printer pressure setting is uneven or too large.

Solution strategy:

Check the storage and transportation conditions of the carbon strip to ensure that it has not been squeezed or deformed.

Adjust the printer pressure Settings to ensure uniformity and moderation.

4. Other questions

Carbon tape breakage: This may be due to poor quality carbon tape or improper printer tension setting. The solution is to replace the high-quality carbon strip and adjust the tension Settings of the printer.

Missing print content: Check that the carbon tape coating is complete, that the print head and roller are clean, and that the printer Settings are correct.

Electrostatic problems: Reducing the printing temperature, placing the carbon strip in a humid environment or using an electrostatic eliminator can reduce the impact of static electricity on the printing effect.


To sum up

To solve the problems in the use of color all-resin carbon tape, we need to start from many aspects, including the selection of high-quality carbon tape, reasonable storage, adjustment of printer Settings and regular maintenance of printing equipment. Through these measures, the printing effect can be significantly improved and the service life of the carbon belt can be extended. If the problem persists, it is recommended to consult professional technical support or seek the help of the manufacturer.