The production process of colored all-resin carbon strips is a complex and delicate process involving several key steps. The following is a general production process:
1. Raw materials preparation
Base film selection: High-quality polyester (PET) film is usually selected as the base film because it has excellent mechanical strength and thermal stability. The choice of base film is crucial to the performance of the final carbon strip.
Resin and pigment mixing: The resin (such as benzoquinone amine resin, epoxy resin, etc.) is mixed with the pigment powder in a certain proportion, and the necessary stabilizers and additives are added to ensure that the toner can be correctly transferred and attached to the medium when heated.
2. Ink production
Grinding and blending: Fine grinding and blending of resin and pigment mixtures to obtain a uniform and fine ink. This step plays a crucial role in the quality of the product.
3. Coating process
Coating ink: The prepared ink is evenly coated on the PET base film. The coating process needs to be carried out in a controlled environment to ensure that the toner layer is uniform and does not show white spots, streaks, or white strips.
Coating lubricant: A layer of lubricant is applied to the other side of the base film to prevent wear of the print head and prevent static electricity.
4. Drying and curing
Drying process: The coated carbon strip undergoes a series of drying processes to remove solvents and solidify the toner. This step is essential to ensure the stability and durability of the carbon belt.
5. Cutting and rewinding
Slitting: The slitting and rewinding machine is used to cut the carbon strip after drying and curing according to a specific width. It is very important to grasp the cutting tension and the tightness of the carbon strip.
Rewinding: the cut carbon tape is wound onto the drum, and packaged and labeled.
6. Quality inspection
Appearance and performance testing: The appearance and performance of the finished color resin carbon strip are tested, including wear resistance, scratch resistance, high temperature resistance, chemical solvent resistance, etc., to ensure that the quality of the carbon strip meets the standard.
7. Encapsulation and storage
Encapsulation: The inspected carbon tape is encapsulated to provide adequate protection and prevent damage during storage and transportation.
Storage: The encapsulated carbon tape is stored in a suitable environment to ensure its stable performance.
In general, the production process of color resin carbon strip is a highly sophisticated and complex process, which requires strict control of the process parameters and quality standards of each link to ensure the quality and performance of the final product.