What are the safety precautions for printing self-adhesive copperplate label paper?

When printing self-adhesive copper plate label paper, pay attention to the following safety precautions to ensure the safety and efficiency of the operation process:

1. Material selection and preparation

Paper quality: Select qualified self-adhesive coated paper to ensure that the surface of the paper is smooth and flawless, so as not to affect the printing effect and subsequent use.

Ink selection: Use environmentally friendly, non-toxic ink, avoid the use of ink containing harmful substances, in order to protect the health of the operator.

2. Device operation and Settings

Equipment check: Before printing, carefully check the working status of the printer to ensure that the equipment is in good condition to avoid safety accidents caused by equipment failure.

Temperature control: For printing processes that require heating (such as heat transfer), the heating temperature should be strictly controlled to avoid paper deformation or print head damage caused by excessive temperature. The printing temperature of coated paper self-adhesive labels is generally between 60-68 degrees, which needs to be adjusted according to the paper type and printer model.

Machine Settings: Accurately set parameters such as paper tension, printing speed and uniform pigment distribution of the press to ensure that the label paper is correctly aligned on the paper and improve print quality.

3. Environmental conditions

Temperature and humidity control: Keep the temperature and humidity of the printing workshop appropriate to avoid excessive humidity resulting in paper moisture absorption deformation or poor ink drying. In general, the recommended temperature and humidity is 22 ° C ±2 ° C, and the relative humidity is 50%±5%.

Good ventilation: Ensure that the printing workshop is well ventilated, timely eliminate harmful gases and dust generated during the printing process, and ensure the respiratory health of the operator.

4. Security protection

Personal protection: Operators should wear protective glasses, masks, gloves and other personal protective equipment to prevent ink, paper debris and other spatter damage to the eyes, skin and respiratory tract.

Fire and explosion-proof: ink and other flammable items should be stored away from the fire source, and equipped with corresponding fire facilities, in case of emergency.

5. Waste disposal

Classification and treatment: the waste generated in the printing process is classified and treated, such as waste paper, waste ink, etc., to avoid environmental pollution caused by random disposal.

Environmental treatment: Encourage the use of environmentally friendly ways to treat waste, such as recycling waste paper, the use of degradable ink.

In summary, when printing self-adhesive copper plate label paper, it is necessary to pay attention to many aspects of safety matters such as material selection, equipment operation, environmental conditions, safety protection and waste disposal. By strictly adhering to these safety precautions, you can ensure the safety and efficiency of the printing process, while safeguarding the health of the operator and the safety of the environment.