How to correctly use self-adhesive copperplate label paper?

To correctly use self-adhesive copper plate label paper, follow the following steps and precautions:

First, preparation

1.Tools: Make sure you have a cleaning cloth, clean water (or appropriate detergent), scissors (if you need to cut labels), and a scraper (or similar tool, such as a hard card) handy.

2.Environment preparation: Choose a clean and dust-free working environment to avoid contamination of labels during the attaching process.

Second, clean the surface of the attached object

1.Check the surface: ensure that the surface of the paste is smooth and clean, without oil, dust, water stains and other impurities. These impurities can affect the adhesion of the label.

2.Clean the surface: Use a cleaning cloth dipped in an appropriate amount of water or detergent, gently wipe the surface of the adhesive until the surface is completely dry and clean.

Third, determine the label position

1.Measurement and marking: Use a ruler or pencil to accurately measure and mark the position of the label on the surface of the object to be affixed. This helps to ensure that the label is neatly and beautifully attached.

2.Consider the direction: Pay attention to the direction of the label (such as the direction of the text and pattern), and ensure that the content of the label is correct after pasting.

Fourth, attach labels

1.Peel off the backing paper: gently peel off the label from the backing paper of the self-adhesive copper label paper. Keep your fingers dry to avoid affecting the stickiness of the label.

2.Align and paste: Align the removed label with the previously marked position and gently press on it. Make sure the label is in close contact with the surface to be attached.

3.Remove bubbles: Use a scraper or hard card to gently scrape the surface of the label and apply even force from the center to all sides to remove possible bubbles.

Fifth, follow-up treatment

1.Check the effect: After attaching the label, carefully check the effect of attaching the label. Ensure that the label is flat, wrinkle-free, and bubble-free, and closely fits the surface of the adhesive.

2.Organize tools: Organize used tools and put them back in their original places. Maintain a clean and organized work environment.

Sixth, precautions

1.Avoid long-term moisture or water immersion: self-adhesive copperplate label paper is easy to lose viscosity in a humid environment, so long-term moisture or water immersion should be avoided.

2.Storage conditions: Store unused labels in a cool and dry place, away from direct sunlight and high temperature. At the same time, avoid contact with chemicals to avoid damage to the label paper.

3.According to the actual needs to choose the viscosity level: self-adhesive copperplate label paper has a variety of viscosity levels to choose from. In the selection, the most appropriate viscosity level should be selected according to the material, surface characteristics and use environment and other factors.

Follow the above steps and precautions to ensure the correct use of self-adhesive copper plate label paper to achieve the best pasting effect.