This article decodes every meaningful specification, from facestock weight to adhesive peel and imaging sensitivity.
This article centers on 1-inch versus 3-inch core roll formats, core diameter matched to desktop spindles versus industrial hubs. The practical goal is simple: the right core for every printer class, with zero surprises when the next carton arrives. Because Xinwei is an own-factory thermal label paper manufacturer, coating control, converting and quality control all sit under one roof, and that manufacturing perspective runs through every section below.
- Keep two or three adhesive grades rather than one generic compromise
- Lock the approved golden sample and require bulk to match it
- Plan storage: cool, dry, dark, sealed and first-in-first-out rotated
- List every printer model, its core size, sensor type and winding direction
- Choose the face: standard top-coated paper, heavy-duty paper or PP/BOPP film
- Check core and winding direction on every custom specification
- Ask whether coating, slitting and die-cutting run in the supplier's own factory
- Define defect handling and replacement policy before the first PO
Q: How do I plan labels for peak season?
Lock the construction and golden samples early, reserve factory capacity with a rolling forecast, buffer the few critical SKUs from burn rate and real lead time, and service printers before the rush. During peak, nothing should change except volume.
Q: What core sizes are used for thermal rolls?
Desktop printers commonly take 25.4mm (1-inch) cores with limited outer diameter; industrial engines often use 3-inch cores and jumbo rolls for long unattended runs. Core and maximum roll diameter must match the machine or the roll simply will not feed.
Q: Why do my labels keep jamming the printer?
Inspect the web: ragged slit edges, inconsistent gaps, scored liners, telescoped rolls and humidity-curled faces cause most jams. Recalibrate the sensor and clean the printer once; if every fresh roll jams the same way, the converting quality or specification is at fault.
Q: Do thermal labels work on plastic, glass and textured surfaces?
They do when adhesive and facestock match the surface: conformable faces for curves, high-tack films for textured HDPE and woven sacks, and clean surfaces at the right application temperature. The surface triangle of material, temperature and time must be solved deliberately.
Q: Are direct thermal labels the same as thermal transfer labels?
No. Direct thermal images the coating itself and needs no ribbon, suiting labels with a service life from days to months or a few years with premium topcoats. Thermal transfer melts ribbon ink onto a neutral face and suits multi-year, outdoor or chemical-heavy service. Most cross-border e-commerce sellers work, including 1-inch versus 3-inch core roll formats, is best served by well-coated direct thermal stock.